TUTORIAL WEEK 1: BASIC ELECTRONICS

  • AtomicX
    7th May 2020 Member 0 Permalink

    METL:

    Your basic conductor.

     

    SPRK

    Electricity; will flow through conductors

     

    PSCN:

    Can be used to “switch on” elements

     

    NSCN:

    Can be used to “switch off” some elements. Does not transfer sparks to PSCN

     

    NTCT:

    Has a lot of behaviours

    Always conducts electricity to PSCN and NSCN.

    Always conducts sparks from NSCN.

    Conducts sparks from PSCN if its temperature is above 100° C.

    If nearby METL is sparked, heats itself up to 200° C.

    If hotter than 22° C, cools its own temperature at a rate of 2.5° C

     

    PTCT:

    Same as NTCT but only conducts from PSCN if under 100 degrees.

     

    ETRD:

    Makes a line of PLSM between it and another ETRD. If more than 2 pixels of it are there it will cause an infinite loop.

     

    BTRY:

    Infinite SPRK

     

    SWCH:

    Conducts electricity when sparked by PSCN, stops conducting when receives spark from NSCN. SWCH is dark green when off, bright green when activated. With deco, switch can make a useful lightbulb.

     

    INSL:

    Will not conduct to/from metal or semi-conductors. Only transfers SPRK to or from PSCN and NSCN

     

    TESC

    Generates LIGH when sparked.

     

    INST:

    Conducts sparks instantly, PSCN must charge it, NSCN receives the charge. Has similar conductivity to conductive wall.

     

    WIFI:

    Transfers spark to other WIFI on same TEMP channel. TEMP channels go up in hundreds. Takes only from PSCN and gives only to NSCN

     

    ARAY

    Can receive a SPRK from all of the electric conductors, even SWCH. It creates a line of the element BRAY in the direction opposite to the side it was sparked from. Unlike other electronics, ARAY must receive a SPRK from a pixel in direct contact with it. BRAY beams will spark metal it comes in contact with.

    Using PSCN to spark ARAY will make BRAY that will erase any normal BRAY. These BRAY beams disappear more quickly and will not spark metal.

    BRAY can pass through every wall, and will be fired at the temperature of the ARAY firing it. ARAY does not conduct heat to anything else.

     

    That concludes BASIC conductors, will do more complicated one in 2 weeks. EDIT. SOME of this info and text came from TPT wiki so credit to them.

     

     

    Edited once by LaserCannonX. Last: 7th May 2020
  • INFINITY-BOI
    7th May 2020 Banned 0 Permalink
    This post is hidden because the user is banned
  • AtomicX
    8th May 2020 Member 0 Permalink

    please comment if this helped you

  • INFINITY-BOI
    8th May 2020 Banned 0 Permalink
    This post is hidden because the user is banned