The Powder Toy

Help with wires

  • macweirdo     4th Sep 2010 Member 0 Permalink
    I have what I call a "Signal Annex". I switch on a wire from the side and trigger a switch to allow a 4 bit signal to pass. However, when I deactivate the switches, I accidentally cause a signal to pass for no reason.

    Here's the save:
    LoadSaveBlock(13987);
  • codefeenix     4th Sep 2010 Member 0 Permalink
    its an issue with INSL/SWCH

    demonstrated here
    LoadSaveBlock(10603);


    If you flip it(draw it backwards(mirror)), it may work correctly.
  • Arsole     4th Sep 2010 Member 0 Permalink
    You seem to have used SPRK so that it is constantly producing current in the lower right one. At least from what I can see on the image.
  • macweirdo     4th Sep 2010 Member 0 Permalink
    @Arsole

    I'm not sure what you mean. Besides, can't you use Powder Toy to view the sim?

    That's not SPRK, it's INSL.
  • wowaname     4th Sep 2010 Member 0 Permalink
    Arsole That has nothing to do with this problem...
    macweirdo INSL does not cause sparks. You need to learn how to use Powder Toy.
  • macweirdo     4th Sep 2010 Member 0 Permalink
    @wowaname

    Hurtful.

    Anyway, I knew that. What do you mean?
  • macweirdo     4th Sep 2010 Member 0 Permalink
    Hello?
  • macweirdo     4th Sep 2010 Member 0 Permalink
    Bump.

    EDIT: Never mind, redesigning it twice did the trick.
You need to login before you can post replies