The Powder Toy

Pressure option for PROP

  • Rubidianlabs     4th Nov 2021 Member 0 Permalink

    There should be a pressure option for the Property drawing tool, i have had a lot of times when i want to set a pressure to something in a large space, which is currently impossible unless i spend hours messing around with AIR and VAC to stabilize pressure, adding an option to change the pressure with the Property drawing tool would make these things a lot easier.

  • phox     4th Nov 2021 Member 0 Permalink

    if you hold ctrl and shift while using the air tool it'll flood fill the area you're clicking, just make sure the area you're filling with pressure is closed off with something that blocks pressure like wall

    Edited once by phox. Last: 5th Nov 2021
  • jacob1     4th Nov 2021 Developer 0 Permalink
    @phox (View Post)
    That is not true. Tools do not have any flood fill support. When using when using shift with a tool, it goes at 10x speed, and ctrl at .1x speed.

    @Rubidianlabs (View Post)
    Your best bet is to use square tool and try to set the entire area at once. You can press = to equalize pressure (start with 0), then apply the amount of pressure you need with the tools.
    You could also use Lua if you are familiar with the console,
    https://powdertoy.co.uk/Wiki/W/Lua.html#tpt.set_pressure
You need to login before you can post replies