SWCH bug!

  • fabrizziop
    11th Aug 2010 Member 0 Permalink
    When you turn off/on a switch, that should be like a spark and propagate all over the switch(like the LCRY). Now, it just affects a little area!
  • fabrizziop
    11th Aug 2010 Member 0 Permalink
    that only happens when switch is very large
  • triclops200
    11th Aug 2010 Former Staff 0 Permalink
    it is made to be that way to prevent overlap.
  • triclops200
    11th Aug 2010 Former Staff 0 Permalink
    I made it purposely like that.
  • codefeenix
    11th Aug 2010 Member 0 Permalink
    also seems that if you try to turn a switch off that has a spark on it the spot of the spark wont turn off.
  • seehp
    11th Aug 2010 Member 0 Permalink
    Yeah, you have to spark it quite a long time to switch it off.
  • Zatnikitelman
    11th Aug 2010 Member 0 Permalink
    Just for reference, the best switch design that I was able to make work so far was a 3x3 block of switch with a lead coming off of the middle pixel of each side of the switch block.
  • codefeenix
    11th Aug 2010 Member 0 Permalink
    you can make a 1px switch that works fine

    i used it in here

    https://powdertoy.co.uk/View.html?ID=7231
  • Z0MG1337H4X0R5
    11th Aug 2010 Member 0 Permalink
    u should make it so tht only the whole side, instead on a little area tht the electricity touches turns green or else its pretty much usless
  • triclops200
    11th Aug 2010 Former Staff 0 Permalink
    I fixed the bugs listed here.