What is wrong with the temp of pump

  • MrDyskietka
    4th November Member 0 Permalink

    I was building building my power plant when some of pumps in the "control rods" was set on for example: 0.40, gameafter netering the map setted in on 0. here is the id:3445679

     

    can yall hepl me with than please

  • LBPHacker
    4th November Developer 0 Permalink
    Saves can't store temperature values like 0.40; they have a precision of 1 degree. 0.40 gets rounded to something, in this case 1. In other ranges, the rounding is a bit different, but the precision is the same.
  • MrDyskietka
    5th November Member 0 Permalink
  • Mackeria
    5th November Member 0 Permalink

    Let me tell you how to use pump temp settings:
    1.Look at temperature value
    2.Look at pressure value
    3.They are the same
    4.If you set the pump temp to 190.00C then pressure will be 190.00
    5.Use property to set your pump temp correctly to your preffered temperature.

  • AerospaceFan
    5th November Member 0 Permalink

    @Mackeria (View Post)

     thats not even what he needs help with...

    and yeah lbp is right, i also experienced this a few months ago for GPMP