The Powder Toy

Fridge acting weird

  • TheDragonRyu     14th June Member 0 Permalink

    I have a heat exchanger in the fridge meant to use up excess cooling to cool down the liquid refrigerant, however as soon as the gaseous refrigerant exits the pipe it instantly heats to over 5000 degrees while remaining a gas. Images are here: https://imgur.com/a/ebuxbDm

    3119937View Save 3119937
    Edited 3 times by TheDragonRyu. Last: 14th June
  • Redd     14th June Member 0 Permalink

    Its the pumps in the area where it goes downwards, they are producing pressure.

    Edited 6 times by Redd. Last: 14th June
  • TheDragonRyu     14th June Member 0 Permalink

    @Redd (View Post)

     Thanks for the input! However, this was  not the issue, it was something to do with pressure squares, pressure would  leak over from the high pressure area to the low pressure area whilst not being displayed, causing it to heat up and cool down  insanely quick and generating MASSIVE heat. I fixed it in my latest version by putting a layer of titanium in between them with the tmp set to 1.

  • Redd     14th June Member 0 Permalink

    I forgot up and down. pumps in the down pipe were producing pressure, and then they get stuck in the sideways pipe

    Edited 2 times by Redd. Last: 14th June
  • Aibenr     11th July Member 0 Permalink

    Um if you can't get it cooled fast enough just use freeze powder

  • Redd     12th July Member 0 Permalink

    @Aibenr (View Post)

     The problem was not that the refridgerant wasn't getting cooled fast enough, the problem was that it was heating up when it wasn't supposed to.

You need to login before you can post replies