Escape Room Tutorial

  • Fusionftw
    1st Jun 2020 Member 0 Permalink

    Tutorial for my Escape Room Save:

    __________________________________

    Use CTRL + X and CTRL + V to move objects around. Most items covered in GRVT are moveable.

     

    Blue signs lead to more in-depth explanations of parts of the escape room. Click on them. For example, you might see a note with a blue sign next to it, and the blue sign leads to what the note says.

     

    SPRK “Begin” to start solving puzzles. You will have 15 minutes.

     

    Puzzle 1:

    You will see a server rack with a screen that says “INSERT DISK”.

    Below it, there are 3 floppy disks, and next to the screen is a disk drive. Using the clues mentioned in the blue sign, you must paste the Green Floppy Disk into the drive slot.

     

    Puzzle 2:

    You will see a machine on a desk with blocks scattered around. You must paste the element blocks into this order (bottom to top): HYGN, NBLE, CO2, OXYG, BRMT. Then, SPRK the small green button to proceed.

     

    Puzzle 3:

    You will see a lone flower pot on another desk. Using the clues mentioned in the blue sign, you must use the watering can in the desk to water the plant until it changes to an upvote. NOTE: THERE IS HIDDEN GRVT, SO WATCH OUT WHEN PASTING THE WATERING CAN DOWN.

     

    Puzzle 4:

    You will see a table with a pot and shelves of elements. Paste the lid onto the pot, then do the following:

    • Cut/paste the PLNT cubes into the pot.

    • Cut/paste some SMKE into the pot to create OXYG.

    • Once there is a good amount of OXYG in the pot, cut/paste in some BOYL.

    • Once WATR has been created (act fast, as the PLNT cube(s) might eat away at the WATR), cut/paste in some CO2.

    Once the left-most light on the ceiling of the room lights up, you’ve completed the puzzle.

     

    Puzzle 5:

    You will see a combination lock and a blue sign that says “Paper”. Using the clues mentioned in the blue sign, you will realize that the light above the combination lock is flashing in morse code.

    Decoding it gives you the number 2010. Enter that into the combination lock.

     

    If you see the “You’ve Won!” sign light up, you’ve won!

    Edited 7 times by Fusionftw. Last: 1st Jun 2020