Element suggestion (ffld) force field

  • j007
    28th Oct 2013 Member 0 Permalink

    it has two elements (FFLD) force field and (FSPW) force spawn

    FSPW when powered shoots FFLD to other FSPW (like ETRD)

    FSPW has temperature channels like wifi and will only shoot to other FSPW with same temp

    FSPW can be destroyed by pressure greater than 20

    FSPW doesn't melt and is acid proof

    FSPW shoots in more increments than 45 unlike ARAY

     

    FFLD is a beam shot from FSPW to other FSPW

    if FFLD beam is sustained it becomes solid but when FSPW is not powered FFLD dissolves (like BRAY)

    when FFLD is powered for a while it becomes stronger (like SHLD)

    FFLD doesn't melt or dissolved by acidic substances

    it breakes under pressure of 60

    it is not conductive of electricity but does conduct heat

    it blocks most pressure but not all

    when FFlD is heated or cooled it changes color blue -273 to light blue -30 green -29 to 49 yellow 50 red 1000

     

     

     

     

     

     

     

  • Schneumer
    29th Oct 2013 Member 0 Permalink

    Well....you could have just asked them to make cray have a special tmp or tmp2 effect....

  • Cacophony
    29th Oct 2013 Member 0 Permalink

    P L _  _ S _ / G _V _ / _S_S

    Hint: You see usually people saying this quite often in the Feedback section.

     

    But seriously,there was another thread with the same suggestion, and I think we should combine some aspects of the suggestion in that thread with the aspects in this one to make this one a bit better.

    Edited once by Cacophony. Last: 29th Oct 2013
  • j007
    29th Oct 2013 Member 0 Permalink

    i like some elements from the other thread like the tmp determining the shape but things i don't like about the other tread is that it would only block are energy elements so any super heated or cooled elements would pass trough and melt whats on the other side shield does the same thing in blocking energy elements unless their shield is activate able in other words power it its there turn it off and the force field is gone

     

    my idea was to have a stronger and more customiseable wall of sorts in it can turn on and off but being destroy able   

  • the_new_powder99999
    31st Oct 2013 Member 0 Permalink

    So, maybe the other idea could cool heated particles and slow down accelerated particles, taking damage by doing so. The best way to work out what is best is if someone coded it and people could work out what it should do from there. Also, I like the idea of the shield going red when it is damaged.

  • j007
    31st Oct 2013 Member 0 Permalink

    hmm, that would increase the uses of the forcefield; depending on how much it cools the elements passing through it. If it cools it enough it could be used for nuclear and fusion reactors so they don't meltdown and in cooling hot surfaces for Stickman.

  • the_new_powder99999
    1st Nov 2013 Member 0 Permalink

    There are a lot of coolants already, forcefields could be supercoolants, but since they cool things down so quickly they take damage quickly and are only effective for a few seconds, I could think of at least 1 very useful thing for that, what does everyone else think?