This would definitely revolutionise reactors!!!

If anybody else has thought of this, tell me!

TURBINE IS, BASICALLY A LINE OF PARTICLES, and in the above CENTRE (EXACTLY, not in the 4th particle in a line of 8 or such.) is ONE particle of FRME. This particle proves the centre of the turbine, the direction it's spinning and the speed it needs to efficiently produce electricity (The larger the turbine, the larger the speed it needs to produce spark, but the longer it stays spinning). Also depending on its life (or speed), it glows red. The faster it spins, the brighter red it glows, although it never actually changes color. When it gets hit by a solid particle from any direction, any face, it loses tmp. When it has no tmp left, it collapses, taking the FRME with it, and turns into BRMT. This can also be caused by pressure going in the wrong direction. At high enough temperatures, it melts into molten ttan. The longer it spins, the longer it generates spark. It can produce spark when either a particle goes through at the required speed, or when heat, from a LIQUID, transitions through the turbine in the right direction, and at a high enough speed.*NOTE: even powders can make it spin, if they go fast enough.* If spark enters the turbine, it generates velocity in its special direction, which could be useful. Can be created when TTAN combines with BRMT at a high pressure and high temperature. It also barely absorbs heat and dissipates it easily when it's spinning to stop itself from melting. 

Color: 0xFFBDE4FF

Melting point: 2100'c

Original tmp per particle: 100

Inertia per particle: 15 life

Speed required per particle: 2xy/particle + 3xy for the baseline (3 particles would need 9xy)

Smallest turbine possible: 3 particles

Largest turbine possible: 513 particles

Uses:

Power plants: it shall be added instead of DTEC or DETECTOR WALL and use the heat from the coolant.

Particle accelerators: it can accelerate particles fast using wind.

Testing explosives: measuring either the heat or the pressure of the blast.

Heat vents: using its great ability to dissipate heat to cool certain objects to 22.00 exactly and heat them up from below 22.00.

Please use this idea. I really want to see it as a reality, although it might stay as a small one for quite a time.

PS: What code does TPT use?!

Not exactly.

• When a particle goes through the turbine with air velocity in the direction opposite of the FRME, it generates spark and decreases the pressure.
• Requires a particle of FRME above it as a centerpoint.
• If spark goes into the turbine, it generates air velocity in the direction of the frme.
• Destructable.

@nukemalot (View Post)

 Basically, but more like the FAN wall.

GOT A NEW IDEA!

• When a metallic powder goes in, it decreases the life from 300 down of all connecting TRBN particles touching the same FRME
• Can be diagonal
• When broken, turns into BRMT
• If a hot liquid enters with air velocity in the direction opposite of the FRME, generates SPRK
• One-way-only for gases and liquids
• If SPRK enters the turbine, generates air velocity in the direction of the FRME