The Powder Toy

Need new WALL type

  • KOTOM     16th Sep 2013 Member 0 Permalink

    Hi, I need wall that blocks pressure and AIR and allows everything else. Or maybe some customizeble WALL.

    F.E. I will happy if there will be wall that blocks PLSM.

    Edited once by KOTOM. Last: 15th Sep 2013
  • Catelite     16th Sep 2013 Former Staff 0 Permalink
  • KOTOM     16th Sep 2013 Member 0 Permalink

    But elements cant pass through this wall...

  • FeynmanLogomaker     16th Sep 2013 Member 0 Permalink

    Yeah, I think he means exactly the opposite.

     

    Edit:

    1314998View Save 1314998
    This might help!
    Edited once by FeynmanLogomaker. Last: 16th Sep 2013
  • KOTOM     16th Sep 2013 Member 0 Permalink

    FeynmanLogomaker:

    Yeah, I think he means exactly the opposite.

     

    Edit:

    1314998View Save 1314998
    This might help!

     How it working?

  • jacob1     16th Sep 2013 Developer 0 Permalink
    1014761View Save 1014761


    basically, just set the .tmp of some TTAN to one, easiest with the console (!set tmp ttan 1). Then it will block pressure without needing any full TTAN walls surrounding it. A real wall would be nice, but this will do.

    Also remember that air goes on a 4x4 grid just like walls. And the pressure will be able to get into, but not out of, the 4x4 grid area the TTAN is in. So you have to make the area a little larger, like the lower right WIFI in my save.
  • KOTOM     16th Sep 2013 Member 0 Permalink

    TTAN is melting in my save =(

  • Oats     16th Sep 2013 Member 0 Permalink

    If your trying to do this in ambient heat, there is currently no way to stop it.

     

    Edit: I believe this has become and element suggesting thread.

    Edited once by Oats. Last: 16th Sep 2013
  • KOTOM     16th Sep 2013 Member 0 Permalink

    Oats:

    If your trying to do this in ambient heat, there is currently no way to stop it.

     

    Edit: I believe this has become and element suggesting thread.

     Without ambient heat. Through TTAN pass very hot things fnl there are PLSM with CLNE near.

  • minecraft-physics     17th Sep 2013 Member 0 Permalink

    jacob1:

    1014761View Save 1014761


    basically, just set the .tmp of some TTAN to one, easiest with the console (!set tmp ttan 1). Then it will block pressure without needing any full TTAN walls surrounding it. A real wall would be nice, but this will do.

    Also remember that air goes on a 4x4 grid just like walls. And the pressure will be able to get into, but not out of, the 4x4 grid area the TTAN is in. So you have to make the area a little larger, like the lower right WIFI in my save.

     Not exactly true, if you make a round bottle of 2px thick TTAN and fill it with pressure it will slowly leak out if you leave it for a while

You need to login before you can post replies