The Powder Toy

Laser Help

  • hackerboy     28th Sep 2011 Member 0 Permalink
    Hello, just asking for a slight bit of help with a laser I am making. When is shoots, the laser rebounds back at it. Is there a way to stop it going back into the barrel of the laser?
  • cctvdude99     28th Sep 2011 Member 0 Permalink
    @hackerboy (View Post)
    If you place some DMND or something cleverly, you can stop it going back in.

    OR

    If you haven't already, coat all your metal with INSL and it still turns the PCLN on/off, so you can stop the metal from melting. :3
  • hackerboy     28th Sep 2011 Member 0 Permalink
    Danke
  • thrice     28th Sep 2011 Member 0 Permalink
    can you post a link so we can see the laser
  • cjdj333     28th Sep 2011 Member 0 Permalink
    add e-wall so the lazer come out the bounce off the e-wall
  • BloodLust     28th Sep 2011 Member 0 Permalink
    with some dmnd mirrors and void you can make it so anything that bounces back is sent in the void
  • OmegaSupreme     28th Sep 2011 Member 0 Permalink
    Use VOID or Powered Void to achieve the desired effect. DO NOT WASTE a 4x4 or 16 pixel-space using E-WALL!
  • Jallibad     28th Sep 2011 Member 0 Permalink
    552428View Save 552428
    if you're okay with having neutrons instead of photons... obviously anyone can use, it's just a demonstration...
  • asdf72     28th Sep 2011 Member 0 Permalink
    @cjdj333 (View Post)
    Why did you post on an old thread?
You need to login before you can post replies