The Powder Toy

fusion reactor/chemical plant by wolle

wolle
wolle
130 / 19
1st Oct 2013
6th Oct 2013
A chemical plant producing OXYG from SLTW (byproduct SALT) using fusion in the main reaction. Upstream distillation, regulated by demand form main reactor. No Wiwi, no Walls. Almost full detructible. Enjoy.
fusion building reactor how2use fusionreactor chemical plant ambientheat

Comments

  • ivel236
    ivel236     7th Oct 2013
    Now this is what i like to see on FP.
  • XenoGenesis
    XenoGenesis     6th Oct 2013
    How the hell do you use this thing.
  • wolle
    wolle     6th Oct 2013
    @CopysafeINC: you're right. high amounts of plasma or too few HYGN or NBLE in combination with free electrons from fusion will spark the TTAN at the reactor inlet. you need a 2-pixel-layer of isolating material to prevent it from sparking. I fixed it by adding some FRME. now the inlet diameter is only 2 pixel. possible the volume per time of produced OXYG is now lower...
  • Dragey
    Dragey     6th Oct 2013
    NO WIWI
  • CopysafeINC
    CopysafeINC     6th Oct 2013
    ok i figured it out: a high concentration of nble in the left reactor that gets turned to plsm will destroy the reactor pipes. but i have not figured out the reason the left reactor is melting the freeze unlike the right
  • belugawhale
    belugawhale     6th Oct 2013
    !set type brck none speeds up the reactor a lot.
  • CopysafeINC
    CopysafeINC     6th Oct 2013
    also the left reactor seems hotter (the freeze water melts only on that side)
  • CopysafeINC
    CopysafeINC     6th Oct 2013
    occasionally the cooling part before the fusion chamber sparks (possibly plsm gets down too low at high levels of nble) causing the pipes to break (i have never seen it happen just the resulting mess)
  • schradieck
    schradieck     5th Oct 2013
    i love simulating meltdowns with this thing
  • Theres100
    Theres100     4th Oct 2013
    SECOND LAW OF THERMODYNAMICS GOD DANG IT