Ptt:Ports

From The Powder Toy
Revision as of 19:42, 28 September 2011 by (talk)
Jump to: navigation, search

Introduction

Standard Powder Toy Technology Ports are designed so that ports of similar types are compatible with other PTT Ports to aid integration of custom technology into standard PTT technology.

The Ports can be found here

Ports

IDE
Pins

(From Top To Bottom)\\ 4bit - Position Out (wave)\\ 4bit - Data In (wave)\\ 1bit - Clock Out (pulse)\\

Purpose

This Port is used to access 4 bit ROM (Read Only Memory).


S-OUT
Pins

(From Left to Right)\\ 4bit - Data Out (wave)\\ 1bit - Clock Out (pulse)\\

Purpose

This Port is used for any 4 bit device.


DDR
Pins

(From Left to Right)\\ 4bit - Data In/Out (wave)\\ 1bit - Read/Write Out (wave)\\ 4bit - Position Out (wave)\\ 1bit - Clock Out (pulse)\\

Purpose

This Port is used for either RAM (Random Access Memory) or RW (Read Write) Capable Devices.


IND-S
Pins

(From Left to Right)\\ 7bit - On then Off\\

Purpose

This Port is used for the small instant numerical display.


IND-M
Pins

(From Left to Right)\\ 7bit - On\\ 1bit - All Clear\\

Purpose

This Port is used for the medium instant numerical display.


IND-L
Pins

(From Left to Right)\\ 7bit - On\\ 7bit - Off\\

Purpose

This Port is used for controlling the large instant numerical display.