Broken metal

Created when iron rusts or when when metals break from pressure.
Properties
Section	Powders
Spawn temperature	22°C
Heat Conductivity	84.4%
Relative weight	90
Gravity	0.3
Acid dissolve rate	0.2%
Flammability	0
State	Powder
Transitions
High temperature	transition occurs above 999.85°C
Misc properties
Conducts electricity (SPRK)
Source code

Broken metal is a heavy conductive powder which is formed when breakable metal is exposed to pressure. Broken metal usually melts under 999.85°C into molten breakable metal, but if it has a ctype of tungsten, it melts under 3421.85°C into molten tungsten.

Creation

Tungsten breaks into broken metal with ctype TUNG if it experiences pressure differences higher than 32. Breakable metal, pipe and Wifi break into broken metal when pressure is higher than 2.5, 10 and 15, respectively.

Damage particles turn breakable metal into broken metal even with heat and air simulations disabled:

+ →

Same for tungsten, but the resulting broken metal has ctype TUNG:

+ →

Breakable metal with tmp value 1 decomposes into broken metal by itself with time. This kind of breakable metal can be obtained when iron rusts on contact with water, resulting in the following reaction:

+ → + → +

Molten rock under pressure between 25 and 50 may randomly turn into molten broken metal:

2× → +

Oxygen may fuse into broken metal under temperature above 9700°C, pressure above 250 and gravity above 20, although the resulting broken metal is often instantly melted into breakable metal.

Reactions

Broken metal and broken electronics may produce thermite on contact (either of the particles turns into thermite at random) when temperature is above 250°C:

+ → + /