Dual Loop Pressurized Water Reactor by dornog70
A Uranium Fueled 2 Loop Pressurized Water Reactor with 3 buildings that simulates all 3 loops somewhat realistically, along with auxilary and safety equipment. Ideal core temperature band 300-370C. Best viewed in fire display.
realistic
nuclear
uran
pressurized
reactor
power
water
pwrs
uranium
Comments
-
pickle4L17 20th Dec 2025
Auto would be my best friend -
dornog70 20th Dec 2025
my final thing i want to add is autocontrol -
dornog70 20th Dec 2025ill probably add temperature sensors around the containment and maybe a coolant sensor in the reactor
-
dornog70 20th Dec 2025i made it so you are able to bypass the scram relay similiary to the ECCS relay by holding down the reset button
-
dornog70 18th Dec 2025new logic: if reactor temperature 150C+ AND a LOCA signal is present THEN CLA automatically initiates
-
dornog70 17th Dec 2025by the way, you can hold down the reset button for the ECCS logic and you can override all the signals, using this you can restart the ventilation and use it as a containment vent
-
dornog70 17th Dec 2025I didnt mention this but there are now metal paths between the reactor building and auxiliary building (along with pipe penetrations) in the containment that allow air (pressure) to flow
-
dornog70 17th Dec 2025There is now reactor building/auxilliary building ventilation which maintains a negative pressure seal in the containment, there is also containment pressure monitors. Upon any LOCA signal the ventilation will trip and once the signal is reset, the ventilation will restart after a short delay.
-
allexotic 16th Dec 2025
me eeepy -
pickle4L17 16th Dec 2025At least we have a dea now!