Dual Loop Pressurized Water Reactor by dornog70

dornog70

129 / 8

6th Feb 2025

5:15:08

A Uranium Fueled 2 Loop Pressurized Water Reactor with 3 buildings that simulates all 3 loops somewhat realistically, along with auxilary and safety equipment. Ideal core temperature band 300-370C. Best viewed in fire display.

realistic nuclear uran pressurized reactor power water pwrs uranium

Comments

• 

  dornog70 6th Dec 2025
  make sure when using ECCS, do not flood the primary system. otherwise heat will not be removed effectively from the reactor core. ensure that there are no present LOCA actuation signals, then HOLD the reset (RST) button to the left of the ECCS actuation button. From there, turn off the ECCS on the safety panel.
• 

  mellowmonster12 5th Dec 2025
  someone tagged this bomb
• 

  TPT_Idiot 5th Dec 2025
  about to give dornog70 a Nobel prize for this save
• 

  pickle4L17 2nd Dec 2025
  who are these seven people that disliked
• 

  SkELE_BOI 1st Dec 2025
  lol didnt really expect to see another femboy on here
• 

  dornog70 1st Dec 2025
  mid way during cooldown you will also reset the reactor trip logic
• 

  dornog70 1st Dec 2025
  before doing this, make sure the steam generators are below 100C
• 

  dornog70 1st Dec 2025
  another thing, once you stop steaming entirely, close all opened main steam valves and shut the MSIVs
• 

  dornog70 1st Dec 2025
  to shutdown>trip the reactor, close turbine valve and MSR valve and open bypass valve>cool down to ~200-250C (you can use steam dump to quickly cool down)>start shutdown cooling>50-100C RCS temperature = reactor cold shutdown
• 

  dornog70 1st Dec 2025
  to startup: turn off shutdown cooling (SDC)>withdraw rods to maintain temperature 350-370C>concurrently, open MSIV once steaming and then MSR and bypass valves>after the MSR outlet is steam (and above 100C), open the turbine valve and close bypass valve. Control rods to maintain temperature.