Nuculus
Nuculus
708 / 36
12th Mar 2019
20th Nov 2019
The console command stops the polonium from melting. You can use the sign element to select it, then copy and enter it into the console. The turbine require heat and pressure to work. Click water coolant to fill up water and click neutron beam to start
electricity fission pressurized nuclear reactor requiresconsole neutron realistic tnpp polonium

Comments

  • magnetman33
    magnetman33
    12th Mar 2019
    Also for starting it up(after doing the little modifications I mentioned) I fill the boilers to the top, fire the neutron gun a few times(even just once is fine) then wait for the temp to reach 850. Then drop the control rods to 2/3 down. The temp will keep rising more slowly, wait till 1200 then move the rods down to 3/4. Then maintain 1200 by doing what I described last comment. Did I mention this is really good?
  • den_koshkin
    den_koshkin
    12th Mar 2019
    That one is really awesome!!!
  • magnetman33
    magnetman33
    12th Mar 2019
    It's really fun to watch the temp and manage the control rods; taking into account the time needed for the POLO to reach 'saturation' of neutrons, thermal inertia, and also fuel burnup(gray POLO). I find keeping about 1/4 of the POLO 'critical' at a time, slowly moving up the reactor until it's all gray. Then refule and do it again! The refuling mechanism is amazing by the way. I'm going to power my house with this it's so good.
  • magnetman33
    magnetman33
    12th Mar 2019
    So, I changed the DEUT to HEAC for better performance(and for fun), and also removed the turbine valve so steam could go both ways. After doing that I can maintain it at 1200C fairly easily. 1200 seems good, a good buffer from Iron's melting point, and also the Gold (which is a bit lower due to the water being right there).
  • TakMashido
    TakMashido
    12th Mar 2019
    Wow, propably one of the best reactor I've seen here. But I found one problem: when reactor is almost at critical temperature one iron pixel in control rods can melt, flow somewhere and make problems during refueling reactor.
  • Nomis56
    Nomis56
    12th Mar 2019
    Instant respect +1
  • magnetman33
    magnetman33
    12th Mar 2019
    While the controls are easy enough to manage, auto control would be a cherry on top lol
  • Iskra10
    Iskra10
    12th Mar 2019
    This is great , make warning signals (dangerosuse heat : core , steam , turbine and more ) and will be perfect
  • magnetman33
    magnetman33
    12th Mar 2019
    So much detail, and it works great. +4