Hey mates, this thread is about this save here
http://static.powdertoy.co.uk/2219210.png

I've been asked how to use it, and what to do with it.
It's basicly a lab where you can try out some of TPTs reactions like proton collision, nuclear fission and fusion, chemical reactions etc..

For example: You can create DEUT simply by mixing water with glow in the chem. part, or do what i have done: Use the proton collider, that mainly creates Noble Gas, transfer this to the Phys. part, add pressure and heat until is fusions to oxygen, tranfer the oxy into the chem. part add some byle and glow, mix it together --> voilla DEUT

How to use it:

Spark buttons to 'push' them.

The first three buttons on the top left activate and deactivate the particle flow for the collider.
The Clear-button stops the colliding action and empties the collider.
The elements will automatically sorted into light elements (gasses) and heavy elements.

The next four buttons are transfer buttons.
Select light or heavy elements, and the chamber you want to put them into.

Now comes the control for the Phys.chamber.
You can increase, decrease and hold temp. and pressure by selecting + - and hold

Last but not least, the chem. chamber:
Activate or deactivate the bunsen burner... well i thik you know what it does.
The Mix-button is connected to a f-ray that stirs the chemicals around. Best is to hold the button a short moment, and repeat multiple times.
On the left side are the buttons to add chemicals into the chem. chamber.

There are two blue buttons at the bottom (between chem. ans phys. chamber) that will transfer the reaction products between the chambers.

So, i think that was all.
Have fun, and let us know what you've got by writing it down in this thread.