Difference between revisions of "Elements:Sensors"

From The Powder Toy
Jump to: navigation, search
(DTEC Detektor)
(Revert page back into english ... also wiki formatting should not be translated)
Line 4: Line 4:
 
=== [[File:INVS.png|INVS]] [[Element:INVS|Invisible]]  ===
 
=== [[File:INVS.png|INVS]] [[Element:INVS|Invisible]]  ===
  
'' 'Opis:' ''
+
'''Description:'''
Niewidoczne dla cząstek pod ciśnieniem
+
Invisible to particles while under pressure
  
'' 'Temp' ''
+
'''Temp:'''
 
22C
 
22C
  
Przy wysokich ciśnieniach, INVS staje niematerialne, dzięki czemu cząstki przechodzą przez podobne E-mur. PHOT może przejść i być przekształcony Neut, ale tylko wtedy, gdy on ściskany.
+
When exposed to high pressures, INVS becomes intangible, allowing particles to pass through like E-wall. PHOT can pass through and be transformed into NEUT, but only when unpressurized.
  
=== [[Plik: DTEC.png | DTEC]] [[element: DTEC | Detektor]] ===
+
=== [[File:DTEC.png|DTEC]] [[Element:DTEC|Detector]] ===
  
Description: The ' detector , it creates a spark when something ctype a particular variable is nearby, then it generates the SPRK
+
'''Description:'''
 +
Detector, creates a spark when something with its ctype is nearby
  
' Temp ' 22C
+
'''Temp:'''
 +
22C
  
The detector generates a spark ( SPRK ) at IT ctype element is nearby. To set the ctype draw on it with the element as for CLNE . When drawing the metal , which may be sparks or any fixed elements in the vicinity of it , not accidentally turn on the top of DTEC , because it will set a ctype and immediately begin sparking metal object. DTEC can be used as a replacement to the detector wall so that you can make your creations smaller.
+
Detector generates a spark (SPRK) when an it's ctype element is nearby. To set its ctype, draw over it with an element like you would with CLNE. When drawing the metal that will receive the spark, or any solid element nearby it, don't accidentally draw on top of the DTEC, because that will set it's ctype and instantly start sparking nearby metal. DTEC can be used as a replacement to detector wall so that you can make your creations smaller.
  
You can set the TMP PROP tool will detect and identify the components radius of ( square-shaped )
+
You can set the .tmp to determine the radius it detects elements from (in the shape of a square)
  
=== [[Plik: TSNS.png | TSNS]] [[element: TSNS | Czujnik temperatury]] ===
+
=== [[File:TSNS.png|TSNS]] [[Element:TSNS|Temperature Sensor]] ===
  
'' 'Opis:' ''
+
'''Description:'''
Czujnik temperatury, tworzy iskry, gdy w pobliżu nie ma cząstek o większej temperatury (temp).
+
Temperature sensor, creates a spark when there's a nearby particle with a greater temperature (temp).
  
'' 'Temp' ''
+
'''Temp:'''
 
22C
 
22C
  
Jeśli materiał, który jest blisko TSNS (w promieniu jednego piksela, że ​​8 otaczających pikseli) ma wyższą temp niż TSNS, zaczyna iskra materiałów przewodzących w pobliżu (w promieniu 2 pikseli).  
+
If a material that is close to TSNS (in a one pixel radius, the 8 surrounding pixels) has a higher temp than the TSNS, it starts to spark nearby conductive materials (in a 2 pixel radius). You can set the TMP to determine the radius it detects temperatures from (in the shape of a square). It doesn't conduct heat, but stores the pressure given, just like TSNS.
Można ustawić TMP określić promień wykryje temperaturę od (w kształcie kwadratu).
 
Nie przewodzi ciepło, ale zapisuje ciśnienie podane, jak TSNS.
 
  
=== [[Plik: PSNS.png | PSNS]] [[element: PSNS | Czujnik ciśnienia]] ===
+
=== [[File:PSNS.png|PSNS]] [[Element:PSNS|Pressure Sensor]] ===
  
'' 'Opis:' ''
+
'''Description:'''  
Czujnik ciśnienia, wytwarza iskrę ciśnienie jest większe niż ciśnienie.
+
Pressure sensor, creates a spark when the pressure is greater than its pressure.
  
'' 'Temp' ''
+
'''Temp:'''
 
4C
 
4C
  
Czujnik ciśnienia jest stosowany do wykrywania, czy ciśnienie / powietrze otoczenia jest większa niż bieżąca temperatury czujnika.  
+
Pressure sensor is used to detect if the ambient/air pressure is greater than the current temp of the sensor. If it detects such a pressure, it will spark any nearby conductors. It does not conduct heat, but stores the pressure given, just like TSNS.
W przypadku wykrycia takiego ciśnienia, to wywołać jakichkolwiek pobliżu przewodów.  
 
Nie przewodzi ciepło, ale zapisuje ciśnienie podane, jak TSNS.
 
  
[[Kategoria: Elementy]]
+
[[Category:Elements]]

Revision as of 16:13, 5 May 2015

Language: English  • español • 한국어 • polski • русский • 中文

This menu was introduced in 84.0 to fill the needs of the lately added sensor materials.

INVS Invisible

Description: Invisible to particles while under pressure

Temp: 22C

When exposed to high pressures, INVS becomes intangible, allowing particles to pass through like E-wall. PHOT can pass through and be transformed into NEUT, but only when unpressurized.

DTEC Detector

Description: Detector, creates a spark when something with its ctype is nearby

Temp: 22C

Detector generates a spark (SPRK) when an it's ctype element is nearby. To set its ctype, draw over it with an element like you would with CLNE. When drawing the metal that will receive the spark, or any solid element nearby it, don't accidentally draw on top of the DTEC, because that will set it's ctype and instantly start sparking nearby metal. DTEC can be used as a replacement to detector wall so that you can make your creations smaller.

You can set the .tmp to determine the radius it detects elements from (in the shape of a square)

TSNS Temperature Sensor

Description: Temperature sensor, creates a spark when there's a nearby particle with a greater temperature (temp).

Temp: 22C

If a material that is close to TSNS (in a one pixel radius, the 8 surrounding pixels) has a higher temp than the TSNS, it starts to spark nearby conductive materials (in a 2 pixel radius). You can set the TMP to determine the radius it detects temperatures from (in the shape of a square). It doesn't conduct heat, but stores the pressure given, just like TSNS.

PSNS Pressure Sensor

Description: Pressure sensor, creates a spark when the pressure is greater than its pressure.

Temp: 4C

Pressure sensor is used to detect if the ambient/air pressure is greater than the current temp of the sensor. If it detects such a pressure, it will spark any nearby conductors. It does not conduct heat, but stores the pressure given, just like TSNS.