Complete Electronics Tutorial

From The Powder Toy
Revision as of 19:54, 1 October 2015 by jBot-42 (talk | contribs) (Using Sensors)
Jump to: navigation, search

This page is currently a work in progress.

The goal of this page is to be a complete electronics tutorial for new players and seasoned ones who want to learn more about electronics, and to replace the existing electronics tutorial that has not been updated since 2011.

Intro to Electronics

This section is primarily for new players, so if you already know about the basics of electricity, SWCH, WIFI, and INST, you can skip ahead to the next section.

Basics of Electricity in TPT

How SPRK Works

SPRK, found in the electronics menu, is the basis of all electronics in TPT. SPRK is an indestructible solid that cannot be placed, but it can be "drawn" on to metals and conductive elements. When a conductive element is sparked, it is replaced with SPRK and the ctype of the SPRK is set to that element. The life of the SPRK is set to 4 and when it reaches 0, the SPRK will replace itself with its ctype. SPRK will also transfer itself to any conductive elements within 2 pixels.

This allows SPRK to move along conductive elements, which include all metals, WATR and SLTW, MERC, and QRTZ (when under pressure). As seen below, different conductors (METL, GOLD, WATR, and SLTW) conduct at different speeds.

1-6-Conductivity.gif

Basic Conductors

The most basic conductors are METL, PSCN, and NSCN, which are found in the electronics menu. These are what you will use most of the time to transfer electricity. METL conducts to both PSCN and NSCN, and both PSCN and NSCN conduct to metal, as demonstrated below.

1-1-Conductors.gif

However, things get a bit complicated. While PSCN conducts to both METL and NSCN, NSCN cannot conduct to PSCN.

1-2-Silicon.gif

This behavior can be used to make a diode, which allows electricity to flow only one way.

1-3-Diode.gif

Using BTRY

BTRY is an element that can be used to constantly spark any conductor. Simply place one pixel of it and it will work.

1-4-Battery.gif

Using INSL

One of the more useful electronic elements is INSL, which completely blocks heat and electricity. This can be used to prevent SPRK from jumping over a 1-pixel gap.

1-5-INSL.gif

Using SWCH to Control Electronics

SWCH is an element that is used to control the flow of electricity by turning it on and off. SWCH is turned on and off by PSCN and NSCN, like many other powered elements you will learn about later, and conducts to and from METL.

1-8-SWCH.gif

Using WIFI to Transfer Electricity

WIFI makes it easy to transfer electricity instantly over long distances instead of using long wires. WIFI takes electricity from METL and only conducts to NSCN. After placing a pixel of WIFI (it must be used in single pixels), you have to set the channel. WIFI has 100 temperature-dependent channels located every 100 degrees, which can be set manually using the PROP tool, but the recommended way is to use jacob1's Set WIFI script found in the Script Manager. This useful tool simply asks you to input the channel number and sets it for you. As seen in the picture, WIFI's color is dependent on its channel.

1-9-WIFI.gif

Using INST

INST is another way to transfer electricity instantly over long distances, but in the form of a wire. Unlike other conductive elements, INST can only take electricity from PSCN and can only conduct to NSCN. It can not conduct to itself over 1-pixel gaps, and it can cross over itself freely, making it possibly one of the most useful electronic elements.

1-7-INST.gif

Basic ARAY Usage

ARAY Basics

ARAY is an element that allows another way of transferring electricity over a long distance, and it is also the fastest conductor in the game. Unlike other electronic elements, it must be triggered by an adjacent conductor, which must be METL, PSCN (which will be covered later), or INST. When triggered, it emits a line of BRAY (a hidden solid element) that fades away after 30 frames. If this BRAY hits a conductor, it will spark it.

2-1-ARAY.gif

If 2 of these BRAY rays collide, it will create a "point" of BRAY that lasts for 1020 frames.

2-2-Point.gif

ARAY allows conductors to be sparked from a distance and aids in making electronic devices more compact and faster.

Useful ARAY Tricks

Using ARAY with SWCH

Along with switching electricity on and off, SWCH can also be used to control BRAY. When SWCH is on, BRAY can freely pass through, but when it is off, BRAY is blocked.

2-4-SWCH.gif

Using ARAY with FILT

FILT can be used to remove the 30-frame delay when firing ARAY, making it the fastest way to conduct electricity. Simply draw FILT where the BRAY beam will be, and use the ARAY. BRAY will disappear instantly inside FILT, and beams can intersect without creating points. BRAY that passes through FILT will be tinted the color of the FILT.

2-3-FILT.gif

Using ARAY with INST

One more useful feature of ARAY is that if it is triggered with INST, the BRAY beam will pass through multiple conductors.

2-5-INST ARAY.gif

Using PTCT and NTCT To Make Logic Gates

PTCT/NTCT Basics

Logic Gates

Useful Electronic Devices

Making a Shift Register

Making a Ring Counter

Making a Binary Counter

Making SWCH Memory

Using Powered Elements

Using DLAY

Using FRAY

Using STOR

Using LCRY

Using Sensors

There are 3 sensors in TPT which are all found in the sensors menu. They are DTEC, which sparks any nearby conductors if it detects a particle of its ctype, TSNS, which sparks any nearby conductors if it is touching a particle with a temperature higher than its own, and PSNS, which sparks any nearby conductors when the pressure is higher than its temperature.

Using Other Elements

PUMP and GPMP

PUMP and GPMP are powered elements that are activated with PSCN and deactivated with NSCN. PUMP will create pressure equal to its temperature and GPMP will create gravity equal to its temperature (Newtonian Gravity must be enabled.)

HSWC

HSWC is a powered element that is active by PSCN and deactivated by NSCN. When turned off it does not conduct heat, but when turned on it conducts heat quickly.

PCLN/PBCN/PVOD

These are all powered elements activated by PSCN and deactivated by NSCN that act as CLNE, BCLN, and VOID when turned on.

Using CRAY and PSTN

Using CRAY

Using PSTN

Advanced PSTN Usage

Using PSTN Properties

Making Pistons Non-sticky

Advanced ARAY Usage

Readers

Faster Logic Gates

Better FILT ROM

Using DRAY