Difference between revisions of "Elements:Electronics"

From The Powder Toy
Jump to: navigation, search
(Menu icons)
(→‎PSCN P-type silicon)
 
(111 intermediate revisions by 48 users not shown)
Line 1: Line 1:
−
This category contains lots of elements that react with spark to perform drastic changes in their behavior, or different ways to transfer an electric current to other electronic conductors. Most have unique properties that are very useful.
+
{{Languages|Elements:Electronics}}
  
 +
== Electronics ==
 +
This category contains lots of elements that can be activated by spark to create, destroy, and duplicate elements and effects. Some elements provide different ways to transfer an electric current to others. Most have unique properties that are very useful.
  
−
=== [[File:METL.png|METL]] Metal  ===
+
Ctrl + = removes all sparks from the screen and resets them to the element they were before. They will sometimes come back if there is BTRY or something else generating sparks on the screen.
−
Transfers charge, melts. Basically copper in behavior. Melts into [molten metal] at 1000C/1273.15K
 
  
−
=== [[File:SPRK.png|SPRK]] Electricity  ===
 
−
A single spark of electricity. Not an actual particle, it's only visible on conducting elements. Heats up certain conductors.
 
  
−
=== [[File:PSCN.png|PSCN]] P-type silicon  ===
+
=== [[File:METL.png|METL]] [[Element:METL|Metal]]  ===
 +
 
 +
'''Description:'''
 +
"The basic conductor, meltable."
 +
 
 +
Transfers charge, melts. Heats up to 300C when SPRK is passed through. Melts into molten METL ([[Element:LAVA|LAVA]]) at 1000C/1273.15K
 +
 
 +
=== [[File:SPRK.png|SPRK]] [[Element:SPRK|Electricity]]  ===
 +
 
 +
'''Description:'''
 +
"Electricity. The basis of all electronics in TPT, travels along wires and other conductive elements."
 +
 
 +
A spark of electricity. Cannot be placed alone, needs to be drawn on a conductive material. SPRK can travel through most conductors every 8 frames. It has 4 frames of activity and then 4 frames of rest before a conductor will receive any more SPRK. Some exceptions to this are water and [[Element:GOLD|GOLD]]. SPRK creates heat and pressure when traveling through most conductors.
 +
 
 +
SPRK can be blocked by [[Element:INSL|INSL]] in most cases. As long as there is an INSL between the two conductors, it will not go through (keep in mind diagonal conduction). Some special elements won't be activated through INSL either, although some will anyway (like [[Element:PSTN|PSTN]]). Some elements have special rules on which other conductors it can conduct to, see each element for help.
 +
 
 +
=== [[File:PSCN.png|PSCN]] [[Element:PSCN|P-type silicon]] ===
 
[[:basic_electronics| See Electronics tutorial]]
 
[[:basic_electronics| See Electronics tutorial]]
  
−
Transfer current to all conductors regardless of rules. Melts into [LAVA] at 1400C/1687K. Put a 1-pixel thick layer of PSCN followed by NSCN to form a simple solar panel. Generally used to activate powered materials or in diodes.  
+
'''Description:'''
 +
"P-type Silicon, will transfer current to any conductor."
 +
 
 +
Transfer current to all conductors regardless of rules. Melts into [[Element:LAVA|LAVA]] at 1414C/1687.15K. Put a 1-pixel thick layer of PSCN followed by NSCN to form a simple solar panel. Generally used to activate powered materials or in diodes.
 +
P-Type Silicon can also be used to convert PHOT into SPRK if combined with NSCN.
  
−
=== [[File:NSCN.png|NSCN]] N-type silicon  ===
+
=== [[File:NSCN.png|NSCN]] [[Element:NSCN|N-type silicon]] ===
 
[[:basic_electronics| See Electronics tutorial]]
 
[[:basic_electronics| See Electronics tutorial]]
  
−
Will only conduct based on the receiving elements rules and does not conduct to PSCN under any circumstances. Generally used to deactivate powered materials or in diodes. Melts into [LAVA] at 1400C/1687K
+
'''Description:'''
 +
"N-type Silicon, will not transfer current to P-type Silicon."
 +
 
 +
Will only conduct based on the receiving elements rules and does not conduct to PSCN under any circumstances. Generally used to deactivate powered materials or in diodes. Melts into [[Element:LAVA|LAVA]] at 1414C/1687.15K
 +
 
 +
=== [[File:INSL.png|INSL]] [[Element:INSL|Insulator]]  ===
  
−
=== [[File:NTCT.png|NTCT]] Negative Temperature Coefficient Thermistor  ===
+
'''Description:'''
 +
"Insulator, does not conduct heat and blocks electricity."
 +
 
 +
Insulator neither absorbs nor releases heat to other elements, meaning it can be used to protect things that are sensitive to heat. A single pixel's width is enough to be effective. However, it is flammable so be wary.
 +
 
 +
Insulator can be used to stop a Spark transfer from wires and electrons less than 2 pixels away, meaning you can have a wire with a 1 pixel space between it and a spark will not transfer if there is insulator in the gap.
 +
 
 +
=== [[File:NTCT.png|NTCT]] [[Element:NTCT|Negative Temperature Coefficient Thermistor]] ===
 
[[:basic_electronics| See Electronics tutorial]]
 
[[:basic_electronics| See Electronics tutorial]]
  
−
Basically will conduct electricity if above 100C/373K. Among its special conductive properties is the ability to cool itself to about 22C. Melts into [LAVA] (NTCT) at 1400C/1687K.
+
'''Description:'''
 +
"Semi-conductor. Only conducts electricity when hot (More than 100C)."
  
−
=== [[File:PTCT.png|PTCT]] Positive Temperature Coefficient Thermistor  ===
+
'''Transitions:'''
 +
At over 1413° C, will melt into LAVA.
 +
 
 +
'''Behaviour:'''
 +
 
 +
Always conducts electricity to PSCN and NSCN.<br>
 +
Always conducts sparks ''from'' NSCN.<br>
 +
Conducts sparks ''from'' PSCN if its temperature is above 100&deg; C.<br>
 +
If nearby METL is sparked, heats itself up to ~200&deg; C.<br>
 +
If hotter than 22&deg; C, reduces its own temperature at a rate of 2.5&deg; C/frame.
 +
 
 +
=== [[File:PTCT.png|PTCT]] [[Element:PTCT|Positive Temperature Coefficient Thermistor]] ===
 
[[:basic_electronics| See Electronics tutorial]]
 
[[:basic_electronics| See Electronics tutorial]]
  
−
Basically will conduct electricity if under 100C/373K. Melts into [LAVA] (PTCT) at 1400C/1687K. Among its special conductive properties is the ability to cool itself to about 22C.
+
'''Description:'''
 +
"Semiconductor. Only conducts electricity when cold (Less than 100C)."
 +
 
 +
Basically will conduct electricity if under 100C/373.15K. Melts into [[Element:LAVA|LAVA]](PTCT) at 1414C/1687.15K. It can cool itself down just like NTCT.
  
−
Since it has the ability to cool itself to about 22C, it is very useful to demonstrate the process of evaporation.
+
=== [[File:ETRD.png|ETRD]] [[Element:ETRD|Electrode]]  ===
 +
'''Description:'''
 +
"Electrode. Creates a surface that allows plasma arcs. (Use sparingly)"
  
−
=== [[File:ETRD.png|ETRD]] Electrode  ===
+
When sparked, finds the nearest electrode and creates a line of plasma between them, transferring the charge. Caution: Use 1 pixel of it per electrode, no more. Too much ETRD will cause large amounts of plasma, and sometimes lag. It will keep looping if you use more than 2. Electrode will not fire to an adjacent electrode if [[Element:INSL|INSL]] is directly in the center of the two. Walls will not affect the plasma or transfer.
−
When energized finds the nearest electrode and creates a line of plasma between them and transfers the charge. Caution: Use literally 1 pixel of it per electrode, not entire blocks. Otherwise this will create an awful lot of plasma which is usually very laggy.
 
  
−
It will keep looping if you use more than 2. Electrode will not fire to an adjacent electrode if Insulator [INSL] is directly in the center of the two. Walls will not affect the plasma or transfer.
+
When one pixel of sparked ETRD conducts to another more than one pixel away, it instantly resets to normal ETRD with a life value of 20, and the second pixel changes to SPRK(ETRD) with a life value of 9.
  
−
=== [[File:BTRY.png|BTRY]] Battery  ===
+
=== [[File:BTRY.png|BTRY]] [[Element:BTRY|Battery]] ===
−
Passes electrical charge to Metal [METL], P-Type Silicon [PSCN] and N-Type Silicon [NSCN]. Boils into Plasma [PLSM] at 2000C/2273K.
+
'''Description:'''
 +
"Generates infinite electricity."
  
−
=== [[File:SWCH.png|SWCH]] Switch  ===
+
Passes electrical charge to most conductors. Sublimates (solid to gas) into Plasma [[Element:PLSM|PLSM]] at 2000C/2273.15K.
−
Conducts electricity when sparked by PSCN, stops conducting when receives spark from NSCN. When a spark transmits downward or to the right through SWCH, it conducts instantly (like INST), when going up or leftwards, it only conducts slightly faster than metal. SWCH is dark green when off, bright green when activated.
 
  
−
=== [[File:INWR.png|INWR]] Insulated Wire ===
+
=== [[File:SWCH.png|SWCH]] [[Element:SWCH|Switch]]  ===
−
Doesn't conduct to metal or semi-conductors. Only transfers [SPRK] to/from [PSCN] and [NSCN].
+
'''Description:'''
 +
"Only conducts when switched on. (PSCN switches on, NSCN switches off)"
  
−
Melts into [LAVA] at 1400C/1687K.
+
Conducts electricity when sparked by PSCN, stops conducting when receives spark from NSCN. SWCH is dark green when off, bright green when activated. With decor, switch can make a useful lightbulb.
  
−
=== Lightning [LIGH]===
+
It might conduct at different speeds depending on where it is sparked from, this is a particle order issue. Once it is saved it will start conducting more instantly from the top left, and conduct more normally from other sides.
  
−
More realistic lightning. Creates a bolt of lightning towards the ground, the size is dictated by the size of the pen.
+
=== [[File:INWR.png|INWR]] [[Element:INWR|Insulated Wire]]  ===
−
Sparks neutron reaction when striking deuterium and plutonium.
+
'''Description:'''
 +
"Insulated Wire. Doesn't conduct to metal or semiconductors."
  
−
=== [[File:TESC.png|TESC]] Tesla Coil  ===
+
Will not conduct to/from metal or semi-conductors. Only transfers SPRK to/from PSCN and NSCN.
−
Creates LIGH when sparked. Only creates large bolts if the TESC is in a circle. Irregular shapes will make what appears to be static. Also, it goes through everything, even Wall.
 
  
−
=== [[File:INST.png|INST]] Instantly Conducts  ===
+
Melts into [[Element:LAVA|LAVA]] at 1400C/1687.15K.
−
Conducts sparks instantly, PSCN to take, NSCN to remove. Has similar properties to conductive wall. Indestructible except for BOMB. Dark grey in colour.
 
  
−
=== [[File:WIFI.png|WIFI]] Wifi ===
+
=== [[File:TESC.png|TESC]] [[Element:TESC|Tesla Coil]]  ===
−
Destructible by ACID and pressure, wireless conductor.
+
'''Description:'''
−
Receives spark from any conductive material (with the exception of NSCN) but only NSCN, INWR and PSCN can receive the spark '''from''' WIFI. There are 99 frequencies to use, all of which are 100 degrees apart. (PSCN was added in 44.7)
+
"Tesla coil! Creates lightning when sparked."
  
−
Breaks into BRMT, or broken metal at a pressure of 15.
+
Creates [[Element:LIGH|LIGH]] when sparked. The size of the lightning depends on the tmp, which is set by the size of the brush when you first draw the TESC
 +
 
 +
=== [[File:INST.png|INST]] [[Element:INST|Instant Conductor (Instantly Conducts)]]  ===
 +
'''Description:'''
 +
"Instantly conducts, PSCN to charge, NSCN to take."
 +
 
 +
Conducts sparks instantly, PSCN activates it and NSCN receives the charge.
 +
Has similar properties to conductive wall; Doesn't melt or break from pressure.
 +
When you place it in a Plus formation "+" with a Thickness of 1, it will not send SPRK on an Angle.
 +
 
 +
=== [[File:WIFI.png|WIFI]] [[Element:WIFI|WiFi]]  ===
 +
'''Description:'''
 +
"Wireless transmitter, transfers spark to any other wifi on the same temperature channel ."
 +
 
 +
Receives spark from any conductive material (with the exception of NSCN) but only NSCN, INWR and PSCN can receive the spark '''from''' WIFI. There are 99 frequencies to use, all of which are 100 degrees apart. the 100th one is the -273.15 ---- -200.01
 +
range
 +
 
 +
Breaks into BRMT, or broken metal at a pressure of 15. Also dissolved by [[Element:ACID|ACID]]. Capable of conducting subframe spark like BTRY.
  
 
For further usage, check here:[[:using_wifi_element| WIFI]]
 
For further usage, check here:[[:using_wifi_element| WIFI]]
  
−
=== [[File:ARAY.png|ARAY]] A-type ray emitter  ===
+
=== [[File:ARAY.png|ARAY]] [[Element:ARAY|A-type ray emitter]] ===
−
Indestructible (44.7), can receive a SPRK from all of the electric conductors, even SWCH. It creates a line of the element BRAY in the direction opposite to the side it was sparked from. But ARAY responses to sparks only 2 frames after the BRAY fully disappeared. Unlike other electronics, ARAY must receive a SPRK from a pixel in direct contact with it.
+
'''Description:'''
 +
"Ray Emitter. Rays create points when they collide."
  
−
Using PSCN to spark ARAY will make BRAY that will erase any normal BRAY. It does mostly the opposite of normal BRAY. It will spark metal and does not fade out slowly. Bray can pass every wall. BRAY (after beta 69) will now become the temprature of the ARAY firing it. ARAY will no longer conduct heat to anything else.
+
Can receive a SPRK from all of the electric conductors, even SWCH. It creates a line of the element BRAY in the direction opposite to the side it was sparked from. Unlike other electronics, ARAY must receive a SPRK from a pixel in direct contact with it. BRAY beams will spark metals upon contact.
 +
 
 +
Using PSCN to spark ARAY will make BRAY that will erase any normal BRAY. These BRAY beams disappear more quickly and will not spark metal.
 +
 
 +
BRAY can pass through every wall, and will be fired at the temperature of the ARAY firing it. ARAY does not conduct heat to anything else.
 +
 
 +
ARAY will not be destroyed by excessive heat or temperature.
 +
 
 +
Upcoming feature:
 +
Emitted BRAY's .life property can be set beforehand by altering the .life property of ARAY.
 +
Note that this doesn't affect the .life of orange BRAY.
  
 
For further usage, check here:[[:using_aray_element| ARAY]]
 
For further usage, check here:[[:using_aray_element| ARAY]]
  
−
=== [[File:EMP.png|EMP]] Electromagnetic Pulse  ===
+
=== [[File:EMP.png|EMP]] [[Element:EMP|Electromagnetic Pulse]] ===
−
Color: blue
+
'''Description:'''
 +
"Electromagnetic Pulse.  Breaks activated electronics."
  
−
Activated electronics on screen will malfunction and heat up at random when SPRK touches EMP. Some electronics will turn into BREL or NTCT. Makes the screen flash when activated, more intensely so if the amount of EMP is larger. WIFI near activated electronics may have its channel changed to a random new one, DLAY may have its delay changed to a random new one, and ARAY/SWCH/METL/BMTL/WIFI may heat up or break.
+
Activated electronics on screen will malfunction and heat up at random when SPRK touches EMP. Some electronics will turn into BREL or NTCT. Makes the screen flash blue when activated, and does so more intensely if the amount of EMP is larger. Subframe EMP devices basically tint the entire screen pale blue. WIFI near activated electronics may have its channel changed to a random new one, DLAY may have its delay changed to a random new one, and ARAY/SWCH/BMTL/WIFI may heat up or break.
  
−
=== [[File:MERC.png|MERC]] Mercury  ===
+
Note, it will not damage metal.
−
Added in version 50.6, Mercury is a liquid that conducts electricity. When heated up, this liquid expands, and vice versa. Does not kill STKM. One of the heaviest liquids, it can even sink below some lighter elements like DUST. It is almost indestructible since it can't catch fire, vaporize, or turn into lava.
 
  
−
=== [[File:WIRE.png|WIRE]] Wire  ===
+
=== [[File:WWLD.png|WWLD]] [[Element:WWLD|WireWorld Wire]] ===
−
Added in version 55.9, Wire is a solid conductible element based on another game known as WireWorld. WIRE is indestructible (excluding BOMB.) WIRE accepts SPRK from PSCN and gives to NSCN. WIRE works on the same principles as [[elements:life| GOL]], simple mathematical rules applied cause generation of four different states; Empty, Electron Head (blue), Electron Tail (white), and Conductor (orange). The rules it follows are:
+
'''Description:'''
 +
"WireWorld wires, conducts based on a set of GOL-like rules. "
 +
 
 +
Wire is a solid conductible element based on another game known as WireWorld. WWLD will not melt or break from pressure. In 84.3, the name of this element changed from WIRE to WWLD to avoid confusion for new users about conductive materials. WWLD accepts SPRK from PSCN and gives to NSCN. WWLD works on the same principles as [[Elements:Life| GOL]], simple mathematical rules applied cause generation of four different states; Empty, Electron Head (blue), Electron Tail (white), and Conductor (orange). The rules it follows are:
  
 
* Empty → Empty
 
* Empty → Empty
Line 89: Line 167:
 
(Please note that one "cell" is one pixel)
 
(Please note that one "cell" is one pixel)
 
   
 
   
−
WIRE is extremely useful for logic gates, and has many other electronic applications. For example, entire computers (albeit, large ones) have been created made entirely out of WIRE.  
+
WWLD is extremely useful for logic gates, and has many other electronic applications. For example, entire computers (albeit, large ones) have been created made entirely out of WWLD.  
  
−
For further instructions on how to use Wireworld Wires please go to http://karl.kiwi.gen.nz/CA-Wireworld.html
+
For further instructions on how to use Wireworld Wires please go to http://karlscherer.com/Wireworlds
 
or http://www.quinapalus.com/wires0.html
 
or http://www.quinapalus.com/wires0.html
 +
 +
=== [[File:CRAY.png|CRAY]] [[Element:CRAY|Particle Ray Emitter]]  ===
 +
'''Description:'''
 +
"Particle Ray Emitter. Creates a beam of particles set by ctype, range is set by tmp."
 +
 +
CRAY is an element that will create a line of its' ctype when sparked. It has the same directions as ARAY (it shoots at an opposite angle when sparked). By default the tmp, which is the length of the beam, is set to 0 (which is a range of 255) but you can change the tmp manually to suit your needs. Tmp2 is used to set how far away CRAY creates the beam. CRAY will automatically set its ctype to the first thing it touches if it is unset, but it can be set by drawing on it with a selected element. CRAY has the same destructible properties as ARAY.
 +
 +
When sparked with anything besides PSCN, INST and INWR, the beam cannot go through particles (meaning that if there is a wall in the way, of any material except CRAY or FILT, particles will not be created on the other side even if it still has much to go)<br>
 +
PSCN is used for delete mode, deleting any preexisting particles (except DMND). If there is no particle in a location, it will just create the ray like normal. Basically, it does not create particles in the spaces for particles it deletes.<br>
 +
INST and INWR is the "go through everything" mode. It will continue past obstacles until it reaches its tmp limit, but not delete them.<br>
 +
If you spark INWR when you have CRAY(SPRK), it will spark any conductive elements the beam passes through.
 +
 +
To set the deco color of things created from CRAY, put FILT in the path, and elements will get that color as the beam passes through. This does not work when sparked by INWR.
 +
 +
=== [[File:TUNG.png|TUNG]] [[Element:TUNG|Tungsten]]  ===
 +
'''Description:'''
 +
"Tungsten. Brittle metal with a very high melting point."
 +
 +
TUNG melts at around 3422C/3695.15K. When you spark it, its temperature rises by about 59C and it can continue getting hotter to around 3324C. When this happens, it will glow bright white. TUNG can be used in glowsticks, heaters, lightbulbs or heat resistant metal. It breaks similar to GLAS and QRTZ, which break at any sudden pressure change. It can withstand large pressures as long as it's pressurized slowly.
 +
 +
=== [[File:DRAY.png|DRAY]] [[Element:DRAY|Duplicator Ray]]  ===
 +
'''Description:'''
 +
"Duplicator ray. Replicates a line of particles in front of it."
 +
 +
When powered, this element copies what is in front of it. By default this will usually double whatever it is copying, but you can set .tmp and .tmp2 to refine how it copies. When sparked by INWR, it doesn't copy diagonally. When sparked by PSCN, it will replace existing particles when placing the copy down. Setting the .tmp to a non 0 value will copy that amount of pixels (instead of stopping at an empty space). Setting .tmp2 sets how much space to leave between each copy. Changing .ctype sets which element to stop copying on (instead of empty space).
  
 
[[Category:Elements]]
 
[[Category:Elements]]

Latest revision as of 01:17, 28 October 2023

Language: English  • Deutsch • español • suomi • 한국어 • polski • русский • 中文（简体）‎

Electronics

This category contains lots of elements that can be activated by spark to create, destroy, and duplicate elements and effects. Some elements provide different ways to transfer an electric current to others. Most have unique properties that are very useful.

Ctrl + = removes all sparks from the screen and resets them to the element they were before. They will sometimes come back if there is BTRY or something else generating sparks on the screen.


METL Metal

Description: "The basic conductor, meltable."

Transfers charge, melts. Heats up to 300C when SPRK is passed through. Melts into molten METL (LAVA) at 1000C/1273.15K

SPRK Electricity

Description: "Electricity. The basis of all electronics in TPT, travels along wires and other conductive elements."

A spark of electricity. Cannot be placed alone, needs to be drawn on a conductive material. SPRK can travel through most conductors every 8 frames. It has 4 frames of activity and then 4 frames of rest before a conductor will receive any more SPRK. Some exceptions to this are water and GOLD. SPRK creates heat and pressure when traveling through most conductors.

SPRK can be blocked by INSL in most cases. As long as there is an INSL between the two conductors, it will not go through (keep in mind diagonal conduction). Some special elements won't be activated through INSL either, although some will anyway (like PSTN). Some elements have special rules on which other conductors it can conduct to, see each element for help.

PSCN P-type silicon

See Electronics tutorial

Description: "P-type Silicon, will transfer current to any conductor."

Transfer current to all conductors regardless of rules. Melts into LAVA at 1414C/1687.15K. Put a 1-pixel thick layer of PSCN followed by NSCN to form a simple solar panel. Generally used to activate powered materials or in diodes. P-Type Silicon can also be used to convert PHOT into SPRK if combined with NSCN.

NSCN N-type silicon

See Electronics tutorial

Description: "N-type Silicon, will not transfer current to P-type Silicon."

Will only conduct based on the receiving elements rules and does not conduct to PSCN under any circumstances. Generally used to deactivate powered materials or in diodes. Melts into LAVA at 1414C/1687.15K

INSL Insulator

Description: "Insulator, does not conduct heat and blocks electricity."

Insulator neither absorbs nor releases heat to other elements, meaning it can be used to protect things that are sensitive to heat. A single pixel's width is enough to be effective. However, it is flammable so be wary.

Insulator can be used to stop a Spark transfer from wires and electrons less than 2 pixels away, meaning you can have a wire with a 1 pixel space between it and a spark will not transfer if there is insulator in the gap.

NTCT Negative Temperature Coefficient Thermistor

See Electronics tutorial

Description: "Semi-conductor. Only conducts electricity when hot (More than 100C)."

Transitions: At over 1413° C, will melt into LAVA.

Behaviour:

Always conducts electricity to PSCN and NSCN.
Always conducts sparks from NSCN.
Conducts sparks from PSCN if its temperature is above 100° C.
If nearby METL is sparked, heats itself up to ~200° C.
If hotter than 22° C, reduces its own temperature at a rate of 2.5° C/frame.

PTCT Positive Temperature Coefficient Thermistor

See Electronics tutorial

Description: "Semiconductor. Only conducts electricity when cold (Less than 100C)."

Basically will conduct electricity if under 100C/373.15K. Melts into LAVA(PTCT) at 1414C/1687.15K. It can cool itself down just like NTCT.

ETRD Electrode

Description: "Electrode. Creates a surface that allows plasma arcs. (Use sparingly)"

When sparked, finds the nearest electrode and creates a line of plasma between them, transferring the charge. Caution: Use 1 pixel of it per electrode, no more. Too much ETRD will cause large amounts of plasma, and sometimes lag. It will keep looping if you use more than 2. Electrode will not fire to an adjacent electrode if INSL is directly in the center of the two. Walls will not affect the plasma or transfer.

When one pixel of sparked ETRD conducts to another more than one pixel away, it instantly resets to normal ETRD with a life value of 20, and the second pixel changes to SPRK(ETRD) with a life value of 9.

BTRY Battery

Description: "Generates infinite electricity."

Passes electrical charge to most conductors. Sublimates (solid to gas) into Plasma PLSM at 2000C/2273.15K.

SWCH Switch

Description: "Only conducts when switched on. (PSCN switches on, NSCN switches off)"

Conducts electricity when sparked by PSCN, stops conducting when receives spark from NSCN. SWCH is dark green when off, bright green when activated. With decor, switch can make a useful lightbulb.

It might conduct at different speeds depending on where it is sparked from, this is a particle order issue. Once it is saved it will start conducting more instantly from the top left, and conduct more normally from other sides.

INWR Insulated Wire

Description: "Insulated Wire. Doesn't conduct to metal or semiconductors."

Will not conduct to/from metal or semi-conductors. Only transfers SPRK to/from PSCN and NSCN.

Melts into LAVA at 1400C/1687.15K.

TESC Tesla Coil

Description: "Tesla coil! Creates lightning when sparked."

Creates LIGH when sparked. The size of the lightning depends on the tmp, which is set by the size of the brush when you first draw the TESC

INST Instant Conductor (Instantly Conducts)

Description: "Instantly conducts, PSCN to charge, NSCN to take."

Conducts sparks instantly, PSCN activates it and NSCN receives the charge. Has similar properties to conductive wall; Doesn't melt or break from pressure. When you place it in a Plus formation "+" with a Thickness of 1, it will not send SPRK on an Angle.

WIFI WiFi

Description: "Wireless transmitter, transfers spark to any other wifi on the same temperature channel ."

Receives spark from any conductive material (with the exception of NSCN) but only NSCN, INWR and PSCN can receive the spark from WIFI. There are 99 frequencies to use, all of which are 100 degrees apart. the 100th one is the -273.15 ---- -200.01 range

Breaks into BRMT, or broken metal at a pressure of 15. Also dissolved by ACID. Capable of conducting subframe spark like BTRY.

For further usage, check here: WIFI

ARAY A-type ray emitter

Description: "Ray Emitter. Rays create points when they collide."

Can receive a SPRK from all of the electric conductors, even SWCH. It creates a line of the element BRAY in the direction opposite to the side it was sparked from. Unlike other electronics, ARAY must receive a SPRK from a pixel in direct contact with it. BRAY beams will spark metals upon contact.

Using PSCN to spark ARAY will make BRAY that will erase any normal BRAY. These BRAY beams disappear more quickly and will not spark metal.

BRAY can pass through every wall, and will be fired at the temperature of the ARAY firing it. ARAY does not conduct heat to anything else.

ARAY will not be destroyed by excessive heat or temperature.

Upcoming feature: Emitted BRAY's .life property can be set beforehand by altering the .life property of ARAY. Note that this doesn't affect the .life of orange BRAY.

For further usage, check here: ARAY

EMP Electromagnetic Pulse

Description: "Electromagnetic Pulse. Breaks activated electronics."

Activated electronics on screen will malfunction and heat up at random when SPRK touches EMP. Some electronics will turn into BREL or NTCT. Makes the screen flash blue when activated, and does so more intensely if the amount of EMP is larger. Subframe EMP devices basically tint the entire screen pale blue. WIFI near activated electronics may have its channel changed to a random new one, DLAY may have its delay changed to a random new one, and ARAY/SWCH/BMTL/WIFI may heat up or break.

Note, it will not damage metal.

WWLD WireWorld Wire

Description: "WireWorld wires, conducts based on a set of GOL-like rules. "

Wire is a solid conductible element based on another game known as WireWorld. WWLD will not melt or break from pressure. In 84.3, the name of this element changed from WIRE to WWLD to avoid confusion for new users about conductive materials. WWLD accepts SPRK from PSCN and gives to NSCN. WWLD works on the same principles as GOL, simple mathematical rules applied cause generation of four different states; Empty, Electron Head (blue), Electron Tail (white), and Conductor (orange). The rules it follows are:

  • Empty → Empty
  • Electron head → Electron tail
  • Electron tail → Conductor
  • Conductor → electron head if exactly one or two of the neighboring cells are electron heads, or remains Conductor otherwise.

(Please note that one "cell" is one pixel)

WWLD is extremely useful for logic gates, and has many other electronic applications. For example, entire computers (albeit, large ones) have been created made entirely out of WWLD.

For further instructions on how to use Wireworld Wires please go to http://karlscherer.com/Wireworlds or http://www.quinapalus.com/wires0.html

CRAY Particle Ray Emitter

Description: "Particle Ray Emitter. Creates a beam of particles set by ctype, range is set by tmp."

CRAY is an element that will create a line of its' ctype when sparked. It has the same directions as ARAY (it shoots at an opposite angle when sparked). By default the tmp, which is the length of the beam, is set to 0 (which is a range of 255) but you can change the tmp manually to suit your needs. Tmp2 is used to set how far away CRAY creates the beam. CRAY will automatically set its ctype to the first thing it touches if it is unset, but it can be set by drawing on it with a selected element. CRAY has the same destructible properties as ARAY.

When sparked with anything besides PSCN, INST and INWR, the beam cannot go through particles (meaning that if there is a wall in the way, of any material except CRAY or FILT, particles will not be created on the other side even if it still has much to go)
PSCN is used for delete mode, deleting any preexisting particles (except DMND). If there is no particle in a location, it will just create the ray like normal. Basically, it does not create particles in the spaces for particles it deletes.
INST and INWR is the "go through everything" mode. It will continue past obstacles until it reaches its tmp limit, but not delete them.
If you spark INWR when you have CRAY(SPRK), it will spark any conductive elements the beam passes through.

To set the deco color of things created from CRAY, put FILT in the path, and elements will get that color as the beam passes through. This does not work when sparked by INWR.

TUNG Tungsten

Description: "Tungsten. Brittle metal with a very high melting point."

TUNG melts at around 3422C/3695.15K. When you spark it, its temperature rises by about 59C and it can continue getting hotter to around 3324C. When this happens, it will glow bright white. TUNG can be used in glowsticks, heaters, lightbulbs or heat resistant metal. It breaks similar to GLAS and QRTZ, which break at any sudden pressure change. It can withstand large pressures as long as it's pressurized slowly.

DRAY Duplicator Ray

Description: "Duplicator ray. Replicates a line of particles in front of it."

When powered, this element copies what is in front of it. By default this will usually double whatever it is copying, but you can set .tmp and .tmp2 to refine how it copies. When sparked by INWR, it doesn't copy diagonally. When sparked by PSCN, it will replace existing particles when placing the copy down. Setting the .tmp to a non 0 value will copy that amount of pixels (instead of stopping at an empty space). Setting .tmp2 sets how much space to leave between each copy. Changing .ctype sets which element to stop copying on (instead of empty space).

Retrieved from "https://powdertoy.co.uk/Wiki/index.php?title=Elements:Electronics&oldid=8932"