Difference between revisions of "Using pipe element"

From The Powder Toy
Jump to: navigation, search
m (1 revision)
(Added another way to preset pipes.)
 
(15 intermediate revisions by 6 users not shown)
Line 3: Line 3:
 
First you have to actually draw the element. From the moment you click with the cursor the drawn Pipe element will start a countdown at which point it will encase itself in a protective shell. Unless you have the game paused, make sure you don't get caught behind the shell generation.
 
First you have to actually draw the element. From the moment you click with the cursor the drawn Pipe element will start a countdown at which point it will encase itself in a protective shell. Unless you have the game paused, make sure you don't get caught behind the shell generation.
  
[[PIPE| {{http://img687.imageshack.us/img687/1995/drawx.gif}}]]
+
 
 +
[[File:Drawx.gif]]
  
 
After it generates its own wall, wait for a moment, and then delete a part of that encasing wall that you want the particles to EXIT from. Take special care to arrange your pipe so you know what end is coming and what end is going.
 
After it generates its own wall, wait for a moment, and then delete a part of that encasing wall that you want the particles to EXIT from. Take special care to arrange your pipe so you know what end is coming and what end is going.
  
[[PIPE| {{http://img815.imageshack.us/img815/7432/pipeorder.gif}}]]
+
[[File:Pipeorder.gif]]
  
 
Once you've made an opening, red green and blue lines will begin appearing outwards from the point of origin until they run out of space to move. Later these lines will be absorbing and moving the elements you want going through the pipe. Wait until these lines are completely finished drawing from start to finish...
 
Once you've made an opening, red green and blue lines will begin appearing outwards from the point of origin until they run out of space to move. Later these lines will be absorbing and moving the elements you want going through the pipe. Wait until these lines are completely finished drawing from start to finish...
Line 13: Line 14:
 
And after the lines reach the end, open another hole. This second hole will be the ENTRANCE for elements to be moved, so be mindful. With this done, the pipe is ready!
 
And after the lines reach the end, open another hole. This second hole will be the ENTRANCE for elements to be moved, so be mindful. With this done, the pipe is ready!
  
[[PIPE| {{http://img687.imageshack.us/img687/9104/attemptfill.gif}}]]
+
[[File:Attemptfill.gif]]
  
 
Wrong ^
 
Wrong ^
 
Right v
 
Right v
  
[[PIPE| {{http://img831.imageshack.us/img831/4551/pipemove.gif}}]]
+
[[File:Pipemove.gif]]
  
  
Line 27: Line 28:
 
...You can also manipulate this manually, if you want.
 
...You can also manipulate this manually, if you want.
  
[[PIPE| {{http://img826.imageshack.us/img826/2207/pipetempmanipulation.png}}]]
+
[[File:Pipetempmanipulation.png]]
  
If you pause the game before drawing Pipe, you can cool the elements to change what Pipe element that they'll turn into. The three examples here are cooled sections of normal pipe, each at a different temperature. You can use this function to manually draw your own pipes without relying on PIPE's automatic generation programming, though it's time consuming to say the least.
+
If you pause the game before drawing Pipe, you can cool the elements to change what Pipe element that they'll turn into. The three examples here are cooled sections of normal pipe, each at a different temperature. You can use this function to manually draw your own pipes without relying on PIPE's automatic generation programming, though it's time consuming to say the least. Another way to do this is to change the CTYPE of the pipe. DUST is the normal gray pipe, OIL is green pipe, WATR is red, and FIRE is blue.
  
 
Also, you can make one-way walls using pipe.
 
Also, you can make one-way walls using pipe.
  
[[PIPE| {{http://img146.imageshack.us/img146/8972/pipeonewaywall.png}}]]
+
[[File:Pipeonewaywall.png]]
  
 
By following these steps... (the brick is the same color as wall but it doesn't matter)
 
By following these steps... (the brick is the same color as wall but it doesn't matter)
  
[[PIPE| {{http://img689.imageshack.us/img689/7708/pipeonewayexample.png}}]]
+
[[File:Pipeonewayexample.png]]
  
 
You can produce functional one-way barriers to elements. Go on, try it out.
 
You can produce functional one-way barriers to elements. Go on, try it out.
 +
 +
 +
 +
If you make your pipe exactly 1px thick when it's generated, and make sure there are no pixels on the corners, the pipe will pump -especially- fast. So long as you make the exits and entrances wider, it's actually much faster than most thicker pipes.
 +
 +
[http://i.imgur.com/e91jO.gif Link Fast Pipe Animation]
 +
 +
For more info, you can also visit [[Using_automatic_PIPE_tracks]]

Latest revision as of 09:28, 3 June 2017

Pipe element can be used to convey elements across the length of the drawn pipe in any element you want at a randomish preset speed. It takes some work to get it perfect but it's well worth the trouble for several reasons.

First you have to actually draw the element. From the moment you click with the cursor the drawn Pipe element will start a countdown at which point it will encase itself in a protective shell. Unless you have the game paused, make sure you don't get caught behind the shell generation.


Drawx.gif

After it generates its own wall, wait for a moment, and then delete a part of that encasing wall that you want the particles to EXIT from. Take special care to arrange your pipe so you know what end is coming and what end is going.

Pipeorder.gif

Once you've made an opening, red green and blue lines will begin appearing outwards from the point of origin until they run out of space to move. Later these lines will be absorbing and moving the elements you want going through the pipe. Wait until these lines are completely finished drawing from start to finish...

And after the lines reach the end, open another hole. This second hole will be the ENTRANCE for elements to be moved, so be mindful. With this done, the pipe is ready!

Attemptfill.gif

Wrong ^ Right v

Pipemove.gif


With careful planning you can make pumps to move elements without even using fan walls or pressure. The elements only have to touch the open end to be sucked into it.

The actual mechanic of how it works is a lot simpler than it seems. The colors red green and blue are each sponges for elements. Whenever Red absorbs an element, Green absorbs anything Red is holding, and Blue absorbs anything Green is holding. Finally, Red absorbs anything Blue is holding, starting the loop again. Since the lines draw out from the exit, it effectively makes a literal conveyor belt of particles.

...You can also manipulate this manually, if you want.

Pipetempmanipulation.png

If you pause the game before drawing Pipe, you can cool the elements to change what Pipe element that they'll turn into. The three examples here are cooled sections of normal pipe, each at a different temperature. You can use this function to manually draw your own pipes without relying on PIPE's automatic generation programming, though it's time consuming to say the least. Another way to do this is to change the CTYPE of the pipe. DUST is the normal gray pipe, OIL is green pipe, WATR is red, and FIRE is blue.

Also, you can make one-way walls using pipe.

Pipeonewaywall.png

By following these steps... (the brick is the same color as wall but it doesn't matter)

Pipeonewayexample.png

You can produce functional one-way barriers to elements. Go on, try it out.


If you make your pipe exactly 1px thick when it's generated, and make sure there are no pixels on the corners, the pipe will pump -especially- fast. So long as you make the exits and entrances wider, it's actually much faster than most thicker pipes.

Link Fast Pipe Animation

For more info, you can also visit Using_automatic_PIPE_tracks